Art3dPeel and Stick Metal Backsplash Tile, Brushed Stainless Steel in Triangle Jigsaw, Pack of 10 Tiles 11.8"x11.8"

This was a great product to upgrade our kitchen. I took me about 6 hours to do the entire 40 square foot area. I made all cuts with a jig saw.I used locktite adhesive as well as the sticky back. Just a few little dabs to make sure.

....but certainly be prepared for a time consuming installation depending how much you use. It took two of us "all" day to complete our blacksplash. It also took a considerable amount of time to make sure that the tiles were all going the same way in our chosen pattern as not to get two squares a like next to each other on all sides. Finally numbered each square with 1-A, 2-A, 3-A or A1, B1, C1 on each row of our three (3) row repeat pattern just to keep them in ordered for placement.Purchased several boxes and not all the square were laid out the same in each box which required a lot more separating of square to continue the pattern.Be prepared to start with all items needed. These squares "cannot" be cut without using a jig saw or chop saw as the enclosed instruction indicate. We had watched several videos for installation of Art3d products but none were these tiles and they cannot be cut with a scissors or utility knife.The back is "very" sticky so make sure you as gently as possible place as they stick very well very fast. There is not a lot of give when placing the square as far as bending them but you are able to put off part of the backing and gradually peel the rest as placing that is best.Overall I like the finished look.

Fantastic tiles! The adhesive is very strong but with a hair dryer on a high heat setting it is possible to remove them. They’re also very easy to cut. Instead of a saw I used 13” lightweight snips and a box cutter to cut each tile. The only downside to this approach is that you have to first cut the large tiles with the boxcutter and then cut each individual square with the snips.

We absolutely LOVE how our backsplash turned out! These tiles for our are definitely the showstopper when people see our van build for the first time. They do not expect to see this modern style inside a cargo van. We absolutely love the look and they are easy to keep clean. The LED lights reflecting off the metal surface create such a cool effect. They are exactly what we were looking for.As for the quality:1. They are on the heavy side, especially for building a van. (The lighter the build the better for gas economy.) In a sticks and bricks house they would be very nice and durable.2. When we received them, the corner of all but 3 tiles were damaged. I did not return them because I was able to work the design with what I had. I had to cut some of the edges off anyway. Plus I didn't have time to wait for a new shipment.3. The metal veneer is thin but nice enough. It is not magnetic, which I didn't expect anyway. The metal is attached to a particleboard-type material. Then the sticky adhesive.4. The peel and stick adhesive was easy to use and seems to be holding well after a year of temperature changes and humidity in Florida. There were a couple of tiles that were not fully covered and I probably should have used construction glue to secure them. But they are doing well enough so far.5. Drilling through to hang the magnetic spice rack was easy enough. Definitely use a drill bit and predrill the holes.

Easy to put on, and because the different shapes break apart easily, its much easier to fit to the space without cutting. Make sure you look at the pattern before putting up.I didn't do my whole backsplash, just the are above the sink and behind the stove top. Really helped give my kitchen a fresh new look in less than an hour.

This is it, right here! I had cut corrugated metal for my backsplash and the look ran its course. I like the metal look in the kitchen and found these tiles. What an improvement! They're definitely thicker than I expected and STICKY as all get out. Watch your placement, because once they're on...they're on.

I spent more than $ 400, a waste of money. The adhesive on the back of aluminum was losing their strength in one month and falling one by one.

I didn't put up our finished backsplash, but this is super easy to install and really high quality. I recommend also buying liquid nail or just an additional adhesive to use with the tiles.