Liqui MolyMoS2 Anti-Friction Engine Treatment | 300 ml | Oil additive | SKU: 2009

Having used various engine additives over the years, I've found that Liqui Moly MoS2 Anti-Friction Engine Treatment stands out for its tangible benefits. This 300 ml can of oil additive is designed to enhance your engine's performance and longevity by forming a high load-bearing lubricating film on all friction surfaces. The results are quite noticeable. My engine runs significantly smoother, especially at higher RPMs, and there's a definite reduction in engine noise, making for a quieter and more controlled driving experience. It truly makes the engine feel like it's running with less effort.Beyond the immediate improvements in smoothness and sound, this additive is also geared towards prolonging engine life by reducing wear. This is a critical factor for anyone looking to maintain their vehicle's health over the long term. I've also observed a slight but consistent improvement in fuel efficiency, roughly around a 10% increase in miles per gallon, which is a welcome bonus given the current fuel prices here in Colorado. While it's a supplement to your regular engine oil, its effectiveness in providing an additional layer of protection and enhancing overall engine operation makes it a worthwhile investment. In my experience, the cost of the product is quickly offset by the gas savings, proving its value.

I'm skeptical of any additive but this had good reviews online outside of Amazon so I decided to give it a try on 2 of my cars. I've got a 94 Toyota Pickup 3.0 and an 80 Camaro with a 305. Both have the same issue of low oil pressure when hot and idling but both run very well. This seemed to have increased the oil pressure in both cars by at least 5 lbs. The Toyota seems to be running quieter too. The Camaro's 305 already runs smooth and quiet so that wasn't an issue. I think it's worth a try if you have similar issues. What I don't know is how long it lasts, especially if I do an engine oil change.

Have used on two different cars, a V6 and 4 liter, this stuff will substantially quiet engine down. No doubt it helps your engine have less wear and tear at points of metal on metal contact where the friction causes parts to eventually wear down.

Start's working right away and after a couple days of driving you can actually tell the difference in engine performance this product is no joke Why did you pick this product vs others?:POS review+++++

Installed this Molly in my Range Rover . It didn’t quiet the loud start up lifer noise but man did it smooth out the engine on idol . I was skeptical when I started the engine . I waited and let the car idol down . Took about 15-20 minutes for it to take effect . Once I increased the rpm’s that’s when I noticed a difference. Seems to bring back torque as well . Very smooth and quiet . I would recommend this product.

Good stuff, if you want to keep your engine in good shape as long as you can this stuff is invaluable when changing your oil. With all the low viscosity oils and cylinder lining variances these days this stuff is just about mandatory as far as insuring that you don't have to worry about your engine.Make absolutely sure you change your oil at regular intervals, do not follow the manufacturer suggestions these days of 7-10k mile oil changes, those recommendations are nothing but an early grave for your engine so they can sell you a new car since you won't get more than 150k miles on an engine using lengthy oil change intervals. Stick to the 5-6k mile oil change intervals and you'll get over 200k out of modern engines.

Nice so far.

Cuts down on friction like it's longer lasting partner Ceratec.